Bowtie Engineering BBB Business Review

Commercial EV Charging Systems

Bowtie Engineering designs, installs, commissions, and tests EV charging systems for commercial and industrial facilities. Because most existing electrical systems aren’t built for the added load of EV charging, our engineers start with your site’s actual power capacity — planning distribution, load, and safety before a single charger goes in. We’ve delivered EV infrastructure for private national clients since 2018, using the same standardized, code-compliant systems approach that runs across our electrical safety and maintenance work.

What does Bowtie's EV charging service include?

Every site is different, so the engineering is custom — but the process and technology are standardized, which keeps projects predictable and repeatable across multiple locations.

Is Your Electrical Infrastructure Ready for EV Charging?

Before selecting chargers, the first question is whether the facility’s electrical system can accommodate the additional demand. Available service capacity, existing loads, distribution equipment, and planned charging use all affect the design. A capacity and load assessment helps identify constraints early, including whether electrical upgrades may be necessary.

Bowtie approaches EV charging as an electrical infrastructure project, not simply an equipment installation. Reviewing the site before committing to a charging configuration helps owners make informed decisions about scope, budget, and future expansion.

Commercial EV Charging Design and Installation

Commercial charging systems need to fit the facility’s electrical distribution and operating requirements. Bowtie’s stated service covers load planning, charging system design, equipment selection, installation, commissioning, and testing. The exact equipment, charging configuration, and construction requirements depend on the site and the agreed project scope.

By considering capacity, distribution, and safety together, the project can be planned around the facility’s actual electrical conditions rather than assumptions about what the existing infrastructure can support.

A Practical EV Charging Project Process

1. Assess the site. Review the existing electrical service, loads, and charging objectives to identify capacity constraints.

2. Develop the design. Plan the electrical distribution and charging equipment around the facility’s requirements and applicable codes.

3. Install and commission. Complete the agreed installation and bring the system online through an appropriate commissioning process.

4. Test and evaluate. Verify that the installed system performs as designed and address issues identified during evaluation.

The sequence and responsibilities for each stage are confirmed in the project scope.

Planning EV Charging Across Multiple Locations

Multi-site EV charging projects benefit from a consistent engineering approach, but no two facilities have exactly the same electrical capacity. Bowtie describes its process and technology as standardized while engineering each location for its specific distribution and load requirements.

This approach can help organizations evaluate sites on a comparable basis, identify locations that need upgrades, and plan deployments without assuming that a charger configuration suitable for one facility will work unchanged at another.

What Should You Know Before Starting an EV Charging Project?

Useful starting information includes the site’s location, the number of charging points being considered, the intended charging use, available electrical drawings, and any known service or panel limitations. These details help frame the initial discussion; Bowtie can determine what additional information is needed for a formal assessment.

Because electrical capacity and site conditions influence the design, an early engineering review is a practical first step before purchasing charging equipment or committing to installation dates.

Frequently Asked Questions

Yes. Bowtie designs, installs, commissions, and tests EV charging systems for commercial and industrial facilities, including the load planning and code compliance the installation depends on.

Often not without changes — added EV load is the most common constraint. Bowtie starts every project with a site capacity and load assessment to confirm what your service can support and what upgrades, if any, are needed.

Yes. Bowtie standardizes its process and technology so EV charging can be deployed consistently across multiple locations, engineered to each site’s capacity.

Start with an assessment of available electrical service capacity, existing loads, distribution equipment, and charging goals. The results help determine whether upgrades or a different charging configuration may be needed.

It depends on the site’s current demand, available capacity, and the proposed charging load. Bowtie evaluates these conditions rather than assuming an existing service has enough spare capacity.

Yes. Bowtie’s published EV charging service includes installation, commissioning, testing, and evaluation of the installed system.

Bowtie describes a standardized approach for multi-site projects while adapting the engineering to each facility’s electrical capacity and requirements.

Timing depends on the site assessment, engineering scope, equipment requirements, permitting, utility coordination where applicable, and installation conditions. A project-specific schedule should be established after the site requirements are reviewed.

In Short

Bowtie engineers commercial and industrial EV charging from capacity assessment through installation, commissioning, and testing — built to your site’s real power capacity and to code.